XTBA

0-10v +V

8 way DMX to Analogue DIN Rail

Works with:



Product Number: 
05901

Further information:





*Now upgraded to include fully enabled RDM and with added features such as emergency mode and grouping.

A mains powered DIN rail mounted 8 channel 0 to +10V decoder. Channels can be set into two groups of four or individual channels set as non dims. Emergency mode allows all outputs to fade to a predetermined level in the event of DMX loss. 
Local output test mode from the address switches. RDM enabled.

Output 0 to +10V DC. Individual outputs can also be set to act as non dims.

9 DIN Module, Width = 157mm, power & data leds, DMX address switches

Specifications:

Dimensions



Supply voltage



Packaging


Colour

Analogue Merge

Works with:



Product Number: 
02604

Further information:





XTBA's Smart Merge A-D will merge up to 24 channels of 0 to +10v analogue control and a DMX data stream into a single DMX512 output signal.

The XTBA SmartMerge A-D will allow older analogue equipment and custom-built controllers to be added into any DMX512 installation. The 24 channel analogue input may be moved via the three offset code switches to any position in the DMX output stream, allowing for analogue control of any channel.

The number of analogue channels used may be decreased from 24 down to 1 via the two length code switches.

Specifications:

Dimensions



Supply voltage



Packaging


Colour

DMX8 AMR PCB

Works with:



Product Number: 
09401

Further information:





AMR = (Analogue , Merge, Replace)

An eight channel analogue input 0-10v +V or 0-5v +V converter to DMX512 PCB.

The eight analogue channels can be set to merge with incoming DMX data (Highest Takes Precedence) or replace channels of DMX. The number of replaced channels can be set from 1 through 8. The card can create its own DMX source if there is no DMX on the input or can be set to transmit only when receiving.

Displays for power / card OK and data in.

Includes BCDs and LEDs.

Specifications:

Dimensions



Supply voltage



Packaging


Colour

DMX8 Decoder PCB RDM

Works with:



Product Number: 
09405

Further information:





*Now upgraded to include fully enabled RDM and with added features such as emergency mode and grouping.

A PCB 8 channel 0 to +10V decoder for upgrading existing analogue systems or interfacing to DMX. Channels can be set into two groups of four or individual channels set as non dims. Emergency mode allows all outputs to fade to a predetermined level in the event of DMX loss. Local output test mode from the address switches. RDM enabled.

Eight analogue channels are available via the HE14 / Molex connector.

Specifications:

Dimensions



Supply voltage



Packaging


Colour

DMX1 Decoder PCB

Works with:



Product Number: 
09403

Further information:





A one channel DMX to analogue 0-10v +V converter on a PCB.

The unit has an additional open collector switch which will be turned on if the selected channel level is above 10%. This feature allows the card to be used with fluorescent ballasts etc.

Includes BCDs and LEDs.

Displays for power / card OK and data. 

Specifications:

Dimensions



Supply voltage



Packaging


Colour

Subscribe to RSS - 0-10v +V